Online UV measuring instrument-M4100

Awellcure-M4100 Product Introduction Online UV illuminmeter-Standard Edition:

This instrument is a small online UV measuring instrument, divided into two parts: probe   and body.

It can be applied to automatic production line, real-time monitoring of UV light source     power value, with standard RS 485 communication interface and simple communication

protocol, can directly communicate with PLC, computer PC and other equipment, real-time     data acquisition and monitoring, suitable for testing UV-LED light source, not suitable     for high temperature environment measurement.

Features and matters needing attention

1.RS 485 communication interface, convenient to integrate with various intelligent devices,  communication protocol can be obtained free to sellers;

2. The current UV power value and temperature value can be obtained in real time; and

the UV probe communication parameters can be set and obtained through the upper computer software;

3. The probe is directly opposite the ultraviolet light source, and the light power and temperature  of the current test point can be obtained. (the probe will be placed in the ultraviolet light source or high temperature environment for a long time  Accelerated aging, or even damage), the use of the need to do protection treatment; parameter

The spectral range measured by this instrument can be divided into two types:

UVA (320-390nm) @365nm Fit: Measure the 365nm UV-LED light source

UVV (390-445nm) @405nm fits: measure a 395 / 405nm UV-LED light source

Customers need to choose the spectral range when buying, an instrument can only choose a    spectral range can not have at the same time.

Maximum measured power: 10W / cm2

Measurement accuracy: ± 5%

Resolution: 1 mW / cm2

Range of temperature measurement: -55 ~ 125C

Data acquisition rate: 10Hz / S;

Communication interface: RS 485

Communication protocol: Communication protocol can be obtained from the manufacturer, and   the customer needs to write the software to read the probe data 

Probe line length: 1.5, m, line temperature resistance 250, degrees Celsius (ferrolon)

Power supply voltage: DC 12V

Sensor size: Long (36mm) wide (18mm) thick (11mm) Body size: long (78mm) wide

(36mm) thick (16.5mm) Ambient temperature: 0 to 45C (degrees C)

Under temperature: 10s (seconds) at 110C (C)

Verification cycle: Since all electronic components, such as photosensors, usually age       with the extension of use time, in order to ensure the measurement accuracy and effect

more accurately, it is recommended that the calibration period is one year.

Warranty period: within one year from the purchase date, except for the damage caused by      objective factors and the LCD screen filter consumables.