Online UV measuring instrument-M4200

Awellcure-M4200 Online UV measuring instrument-intelligent version: 

This instrument is a small online UV measuring instrument, which is divided into two parts: the body and the photoreceptor. It can be used in automated production lines to monitor the power value of UV light sources in real time. It has a standard RS485 communication interface and a simple communication protocol. It can directly communicate with PLC, computer PC and other equipment for real-time data collection and monitoring; Suitable for testing UV-LED light sources and traditional UV mercury lamps.

Online UV measuring instrument-intelligent version: 

This instrument is a small online UV measuring instrument, which is divided into two parts: the body and the photoreceptor. It can be used in automated production lines to monitor the power value of UV light sources in real time. It has a standard RS485 communication interface and a simple communication protocol. It can directly communicate with PLC, computer PC and other equipment for real-time data collection and monitoring; Suitable for testing UV-LED light sources and traditional UV mercury lamps.

Features and precautions. 

1. RS485 interface, which can obtain the current UV power value and temperature value (body temperature) in real time; and set and obtain the body communication parameters through the host computer software (the software needs to be purchased separately, or the customer can design it by himself); 2. The current power, energy, and temperature can be displayed on the main body display. The upper and lower limit power alarms can be set and alarm signals can be output. The magnification can be corrected through the main body buttons.

Parameter

The spectral range measured by this instrument can be divided into two types: 

UVA (320-390nm) @365nm Suitable for: measuring 365nm UV-LED light source and traditional UV mercury lamp UVV (390-445nm) @405nm Suitable for: measuring 395/405nm UV-LED light source and traditional UV mercury lamp Customers need to select a spectral range when purchasing. An instrument can only select one spectral range and not both at the same time. 

Maximum measuring power: 10W/cm2 

Measurement accuracy: ±5% 

Resolution: 1 mW/cm2 

Data acquisition rate: 10Hz/S; 

Communication interface: RS485 

Communication protocol: The communication protocol can be obtained from the seller. Customers need to write their own software to read the probe data. Receiver line length: 3m, 5m, 10m optional.

Power supply voltage: DC12V 

Probe size: length (5m) × diameter 6mm Body size: length (78mm) × width (36mm) × thickness (50mm) 

Ambient temperature: 0 to 45°C (Celsius) 

Withstand temperature: The standard probe can be continuously irradiated for no more than 10s (seconds) at 110°C (degrees Celsius); the high-temperature probe can withstand temperatures of 300 degrees for 24 hours. 

Calibration cycle: Since all electronic components, such as photoreceptors, usually age with time, in order to more accurately ensure measurement accuracy and effect, it is recommended that the calibration cycle be one year. Warranty period: Free warranty for non-human damage within one year from the date of purchase, except for damage caused by objective factors and consumables such as photoreceptor LCD screen filters.